Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 26.06.2025 13:20

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Upvotes:

Now when you have a certain ac resistance, then a current flows in a loop.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

What is something you saw while on an airplane that you couldn't believe?

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

So, the voltage could go up to 500 volts, and the fuse will not open up.

a photo is worth a thousand words.

How can one learn to talk frankly?

He then describes Rainy Season and Lightning.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

SpaceX May Be Failing to Get Starship Working at All - futurism.com

2024–10–10[John johnson John Johnson ]

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

NYC woman found a phone buried in her lawn — and police say it’s a new tactic thieves use to spy on homeowners - AOL.com

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

This is 'the assistant's answer'

What is lightning?

Weed Could Be Wrecking Your Heart – Study Uncovers Dangers of Smoking and Edibles - SciTechDaily

eight

Edit 2024–10.

There are two important concepts here.

Astronomers simulate a star's final moments as it's swallowed by a black hole: 'Breaks like an egg' - Space

One is “what exactly is in a ‘surge protector’ ? ”

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

This is where the MOV conducts again, and dissipated the energy.

What are some lesser-known facts about Bollywood and the Indian film industry? Are there any insider secrets that only those in the industry would know? How reliable are these claims?

This one hit behind the barn.

the problem then depends on "how fast does the fuse operate?".

At one ohm, the resistor has a maximum of 1 watt power.

GLP-1 drug helped type 1 diabetes patients keep healthy glucose levels and lose weight - STAT

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

What does a fuse do?

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

Juror Dismissed In Sean "Diddy" Combs Trial For Perceived "Lying" - Deadline

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

It also is a device that limits the change in current flow.

But it can get overloaded, and no longer works.

50 Cent Pledges to Prevent a Trump Pardon for Sean Combs: ‘I’m Gonna Reach Out’ - Rolling Stone

[old diagram got deleted by accident]

In schematic diagrams this is the symbol for a fuse:

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

Musk's Daring Gambit Has Managed to Do Something Remarkable: Alienate Democrats AND Republicans - futurism.com

This is the picture of an electronic coil of wire wound around a core of magnetic material.

nine

(Dc diagram shown, AC is similar).

Charting the Global Economy: US GDP Falls on Larger Trade Hit - Bloomberg

These are simplified answers to the original question, and does not change anything I wrote above.

so, what happens?

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

Magic unveil new logos, uniforms, courts in long-awaited rebrand - Orlando Sentinel

It seems Mohan does not understand the difference between a comment and an Answer.

There are three different concepts here that are getting confused.

He then describes the function of a fuse.

A fuse is a non-resetable over current circuit protector.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

This is where this question deviates from being a 'generic' question, and becomes more specific.

but this device (an Inductor) … impedes the rapid changes in the current.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

what exactly is a ‘surge’ protector?

Here is a simplified AC power diagram.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

Barnstars:

These devices are installed between the “hot” and “neutral” and protective ground.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

2024–10–14 [Omar Gharbi Omar Gharbi ]

I post the exact comment here.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

But… the neutral is now “floating” because of the 1 ohm resistance.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

The third is lightning and “how it gets conducted into a home.”

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

At least they know the answer if they wanted it.

The bolt then partially travels down the line to your home.

An AC voltage/ current source, and an ac inductive load.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

He then asserts :

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

but I think this circuit , shows a few more pieces.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

The other is “what does a “fuse” do?”

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

Because the load is inductive, the current lags the voltage.(by a bit).

[image of Common-mode choke]

The MOV will conduct when the voltage exceeds 50% of line voltage.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

First Sentence:

One

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

For this case there are devices called Metal oxide varistors (MOV).

A circuit breaker is similar, but is resettable.

This device then solves the entire problem.

2024–10–16 [ OO OLAOYE OYEBODE ]

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”